| |
Multi-Axis Testing
Slip Table with Combo-Base System |
| |
|
|
| |
 |
Introduction |
| TMC solution slip tables are
designed to provide the optimum test |
| platform for horizontal testing
with any shaker combination. Our |
| unibase concept provides a structural
steel body to align the |
| shaker and table on a rigid
platform. All the slip tables are |
| designed with precise grinded
natural granite slab with a |
| selection of guidance bearings
to meet different applications and |
| budgets. The stiffened and welded
body provides good reaction mass |
| and damping. The built-in isolation
system reduces vibration |
| transmission to the floor and
prevents any interference between |
| lab equipments. |
| Features |
| Magnesium slip plate |
| Low profile reaction mass with
total system isolation(Standard 2.5Hz) |
| Stiffened and welded steel
body design with high mass to force ratios |
| Designed for combined environment
applications |
| Stand alone slip table available
to interface to any shaker(existing or new) |
| |
| GT Series |
| GT Series, guided oil film
tables are designed with less expensive guided V-Groove bearing, |
| combined with magnesium slip
plate. Oil is supplied through the granite slab port holes below |
| the slip plate and provides
a low friction slip surface and a damping medium for restraint of |
| resonances, pitch and roll
moments. |
| |
| Features |
| low Pressure Hydraulic Pump |
| Self Contained Oil Reservior
with Oil Filter |
| Yaw Restraint by V-Groove Guide
Bearings combining with the armature guidance system |
| Inexpensive technique to perform
horizontal testing |
| |
| BT Series |
| The BT Series design provides
a high over-turning moment and cross-axial restraint.This |
| concept combines a standard
slip table assembly with 3000 PSI hydrostatic bearings to provide |
| high dynamic momnet restraint
while preserving the damping characteristics of guide oil film. |
| |
| Features |
| Heavy products testing with
high centers gravity with restraints moments by hydrostatic bearings |
| Cross-axis motion typically
less than 10% of input at frequencies up to 2000 Hz |
| 3000 PSI Hydraulic Power Supply |
| Hydrostatic Journal Bearings
to restrain high yaw, roll and pitch moments |
| Pressure Interlocks |
| Reservior Oil Filter |
| T-Film Bearing (Optional) |
| |
| |
